Waterslide Decal Paperby Lazertran
Lazertran Waterslide Decal Paper is an amazing new type of transfer paper for art, crafts, home decorating, scrapbooking, and more – use it anywhere you want to add your own picture or design.
It enables you to add your unique design or image to almost any surface, including paper, tiles, windows, painted or papered walls, stone, fabric, metal foil, plaster, candles, polymer clay etc. Just print or copy your image onto the special Lazertran paper, trim it, soak in water, and then apply – the image literally slides off the paper! Available in packs of 10 - 8 1/2 in. x 11 in. sheets.
Instructional CD Book with tips and project ideas is also available.
Regular Lazertran is meant for use with color copiers. Lazertran for Inkjet is to be used with inkjet printers only (not for use with laser or bubblejet printers). Lazertran Silk can be used to apply transfers to fabric, metal foil, or polymer clay and is for use with either color copiers or laser printers.
CAUTON! Please be aware that a number of photo copiers now run too hot for Regular Lazertran. Copiers and machines that fuse over 180° C. are not recommended. If in doubt, please use Lazertran Inkjet.
Ask a question about Waterslide Decal Paper Ask a question about this product | See all questions & answers (10) Average User Rating: Based on (64 Reviews) MAC from MI says: This stuff is amazing! I have used it on many different mediums over the years with fantastic results; glass, metal, wood and a little fabric. It pays to read up on the product before you use it. There...[more] Please wait...
You May Also Like...
How to get VIP Club Prices
Anyone can be a VIP Member with:
Product Questions and AnswersAsk a Question
Ask a Question
How can you tell which side of the paper to use? - Asked by carl k on 11-Jun-14
Answer
Lazertran has a liner sheet backing. The image should be printed onto the glossy side. - Answered by MisterArt on 16-Jun-14Because of size, I will need to use more than one sheet of Lazertran inkjet transfer paper. Will it be possible to join the image together without the seam showing? - Asked by Shirley on 06-Apr-14
Answer
Multiple sheets of transfer paper may be used and assembled to create large images. This delicate process requires careful trimming and alignment of each part of the image. Seams should be minimal. Depending on what the image is being transferred onto, heat setting may reduce the appearance of seams. - Answered by MisterArt on 09-Apr-14Can you tell me if your decal paper works for ceramic mugs? I'd like to be able to wash it afterward. - Asked by Audra Brewer on 23-Mar-14
Answer
Yes, Lazertran may be applied to ceramics and then baked in a domestic oven to make it washable. Lazertran is not to be fired in a kiln. Be sure to print the image in reverse as a mirror image. Follow application instructions, but apply the decal to the ceramic mug face down with the toner towards the ceramic surface. The backing paper should slide away as it is applied. Smooth out any air bubbles. Place in a domestic oven and follow the heat set instructions until the decal becomes shiny. - Answered by MisterArt on 27-Mar-14Can I kiln-fire this? I want to transfer decals to ceramics and then fire them. - Asked by alain devise on 18-Mar-14
Answer
This product does not require kiln firing temperatures. It may be heat set in a traditional oven. Bake for one hour at 250° F. Increase temperature by 50° every 15 minutes until reaching 450° F for a final 15 minutes. The decal will become shiny and scratch resistant. - Answered by MisterArt on 19-Mar-14What is the difference between Regular Lazertan and Lazertan for Inkjet? - Asked by Cristy W on 04-Mar-14
Answer
Regular Lazertran is meant for use with color copiers. Lazertran for Inkjet is to be used with inkjet printers only (not for use with laser or bubble jet printers). Lazertran Silk can be used to apply transfers to fabric, metal foil, or polymer clay and is for use with either color copiers or laser printers. Caution: Please be aware that a number of photocopiers now run too hot for Regular Lazertran. Copiers and machines that fuse over 180° C are not recommended. If in doubt, please use Lazertran Inkjet. - Answered by MisterArt on 04-Mar-14Can I use a Canon Pixma IP 4200 with Lazertran? - Asked by Joyce R. on 19-Oct-13
Answer
If it is an inkjet printer, yes. If not, it is recommended that you use the regular Lazertran. - Answered by MisterArt on 21-Oct-13Can Lazertran paper be used on clay that air dries? - Asked by Elaine M on 09-Jul-13
Answer
Everything I have read states it may be used on Polymer clay, so, since you are not even having to heat it, it should work just as well. Lazertran customer support suggests a final varnish, however. - Answered by MisterArt on 10-Jul-13Can I use this on a wax candle? - Asked by PF in BC on 16-Apr-13
Answer
Lazertran Waterslide Decal Paper is not recommended for use on wax surfaces. - Answered by MisterArt on 17-Apr-13Which Lazertran do I have to get to apply to metal? - Asked by Tania on 18-Mar-13
Answer
Lazertran Silk can be used to apply transfers to metal. - Answered by MisterArt on 20-Mar-13Which side gets printed on? - Asked by Russ on 16-Sep-12
Answer
The paper should be loaded into the copier face-up as packaged. Photo copiers now run too hot for Regular Lazertran. Be sure you have the Lazertran for inkjet. - Answered by MisterArt on 10-Oct-12Ask a Question About Waterslide Decal Paper
Your email will not be shared. We will only use your email address to respond to your question.
When asking your question, please be as descriptive as possible, it will allow us to give you the most accurate answer possible.
|
|||||||||||||||||||
Please wait...
Please wait...
|