Glossary

Word of the Day!

nave


The part of a church between the entrance and the choir. It is usually in the western end of the building. Generally it is where seats are placed for worshippers.


Example: Notre Dame Cathedral, Paris, France, begun 1163

rabbit skin

The source of what authorities consider the best quality of glue size.

jump to top of page

raising

The shaping of a malleable metal such as silver or gold by hammering it around a domed model generally of pitch, to extend it from a sheet to a hollow form.

See Also:  bossembossrepoussésinkingwrought iron

jump to top of page

raku

Porous low-fired ceramic ware characterized by deep, subtly changing colors.

jump to top of page

rasp

A course abrasive tool made of metal (usually steel). The abrasive surface has many pointed teeth shaped like tiny pyramids, and typically the surrounding surface is perforated so that dust doesn't clog it. Rasps are used in shaping and smoothing wood, plaster, ivory, stone, etc. Files are generally more finely abrasive than rasps, while rifflers are the most finely abrasive of all rasps.

jump to top of page

ream

500 sheets of paper.

jump to top of page

rebate

In framing, this is the step-shaped cut in the reverse side of the molding which accepts the edge of the canvas, panel, etc.

jump to top of page

reduction firing

A method of producing greater depth of color on a clay body by firing ceramics with reduced oxygen in the kiln.

jump to top of page

refractory

Resistant to high temperatures. Refractory materials are used for molds in lost wax casting and for kiln furniture on which ceramic ware stands while it is fired.

jump to top of page

register

The exact alignment of shapes or edges in various areas of any piece of work. In printmaking, registration is the proper positioning of colors.

jump to top of page

reinforced concrete

Concrete with increased tensile strength produced by iron or steel mesh or bars embedded in it. Also called ferroconcrete.

jump to top of page

release agent

A substance applied to the inside surfaces and seams of a mold to prevent the casting from adhering to the mold; also variously known as a separator, parting agent, or parting compound. A release agent for casting plaster in a mold may be a thin clay slip, or several applications of a soft liquid soap, petroleum jelly, or thin oil. To permit clay to separate from a mold, apply either powdered chalk or talc as a release agent.

jump to top of page

relief

A sculpture that is set on a two-dimensional surface such as clay, stone, or plaster, and which is carved so that there is the illusion of three dimensions.

Example: Donatello's The Resurrection, c. 1460-1466

jump to top of page

relief printing

Printing methods in which a block of wood, linoleum or some other material's surface is carved so that an image can be printed from it-- un-carved areas receiving ink which transfers to another surface when the block is pressed against it. Block printing.

jump to top of page

remarque

In printmaking, most often in etchings, a sketch originally made by the artist on the margin of his plate to test his tools, often to test the degree of the mordant's biting before immersing the entire plate in the acid bath. Because such remarques were originally intended to be scraped or burnished away before the final edition of the plate is printed, a print with a remarque is often called a remarque proof. In the nineteenth century such remarques came to be so valued that they were often retained as part of the finished print. The subjects of these little drawings typically relate in some way to the larger image. The practice greatly fell out of use in the twentieth century.

See Also:  edge

jump to top of page

replica

A copy of a painting or sculpture originally done by another artist. Young artists have long been trained by painting replicas of masterpieces.

jump to top of page

repoussé

The method of producing metal relief by hammering and/or punching a sheet of metal from the back. The metal is usually hammered into a prepared mold, and then final details are engraved onto the front of the relief. (pr. reh'poo-say")

See Also:  bosscopperembosspitchraisingtoreutics

jump to top of page

resin

A natural substance secreted by plants (mostly by trees), which is clear to translucent yellow or brown, such as copal, rosin, and amber, used principally in lacquers, varnishes, inks, adhesives, synthetic plastics, and turpentine. Also, synthetic plastics, including thermoplastic materials such as polyvinyl, polystyrene, and polyethylene and thermosetting materials such as polyesters, epoxies, and silicones that are used with fillers, stabilizers, pigments, and other components to form plastics.

jump to top of page

resist

A substance which protects a surface from receiving paints, inks, or dyes. Waxes are commonly used as a resist to the dyes used in batik.

See Also:  beeswaxblock outlithographyparaffin (or paraffin wax)

jump to top of page

retouch

To make corrections on artwork. In photography, eliminating or altering parts of a picture.

jump to top of page

RGB

Red green blue. An additive system for representing the color spectrum using combinations of red, green and blue. Used in video display devices.

jump to top of page

riffler

A fine, small, usually double-edged and frequently rounded rasp. The riffler is used in delicate shaping and finishing of a carving. Rifflers are made in different shapes and sizes for work in wood, metal, and stone. Files are generally more finely abrasive than rifflers.

jump to top of page

ripsaw

A long-bladed hand-held saw with teeth designed for cutting wood in the same direction as the grain runs.

See Also:  circular sawcrosscut saw

jump to top of page

risers

In lost wax casting, risers are channels through the mold which allow air to escape as molten metal is poured into the mold. Although such channels are also sprues (or rods), other sprues are runners, through which air and gases can escape.

See Also:  rodding

jump to top of page

riveting

A method of joining sheets of metal using short bolts with flattened heads.

jump to top of page

rodding

The process of attaching wax rods to the surface of a wax model in lost wax casting. The rods form the runners and the risers in the mold. In some regions a rod is called a sprue, and rodding is called spruing.

jump to top of page

rosin

See resin.

jump to top of page

rottenstone

A soft, decomposed limestone. In powder form, rottenstone is used to clean and polish photographs for retouching.

See Also:  abrasive

jump to top of page

roving

A light rope made of loosely bonded glass fiber, used as reinforcement for resin sculpture.

jump to top of page

rubbing compound

An abrasive paste used to rub down the surface of a resin sculpture to give it a polished finish.

jump to top of page

runner

In lost wax casting, a channel in the mold through which the molten metal flows into the mould from a funnel or runner cup. Channels are made by attaching wax rods to a wax model prior to investment. When the mold is full, the runners fill with metal too. They must then be sawn off and filed. Occasionally they have been incorporated into the design of the final work, and not sawn off. A common example is the tang descending from the base or lowest portion of a sculpture, which is employed to secure the sculpture to its pedestal.

See Also:  risersroddingsprue

jump to top of page

rust

A brown or reddish-brown oxide which forms on iron by corrosion, caused most commonly by exposure to water. A common source of brown pigments.

jump to top of page
Latest Product Reviews
Bags are clear and the correct size. The flap in the back is too big, after the adhesive. It will bend and get messy when in a stack.
- anne johnson in ny
Great product and fast shipping... love that you're one of the only site it's available for purchasing. Thanks for having it in stock when I need it!
- Tena in GA
Good quality and just what I needed.
- Luanne in Richmond VA
Free Download for Kids

Download free coloring book pages Download FREE coloring
book pages to color at
home or school.

View Pages »